Lifting Equipment & Material Handling

Innovating Lifting Gear Supply

You'll find everything you need to perform the lift or move when shopping with LES from a simple sling or shackle all the way up to the full crane system and we'll even send it anywhere in the world too! Established in 2012 with roots dating back over 35 years, LES takes lifting gear supply to new heights by combining good old-fashioned knowledgeable technical sales teams with tomorrow's technology. Standing at the forefront of the global supply of lifting, material handling and height safety gear LES provides innovative global supply platforms that make it easy to shop for essential site needs, we pride ourselves on supplying best-in-class products with a first-class service.

OUR PRODUCT CATEGORIES
BRANDS WE SUPPLY

Our expertise goes beyond standard 'off the shelf' sales, we have the ability to import large quantities of equipment at short notice from our suppliers all over the world, we have worked on projects that require mass quantities with very short lead times. Anything you require, we can supply with exceptional levels of service.

OTHER CATEGORIES
Height Safety
Lifting Clamps
Jib Cranes
Wire Rope Winches
Spares
Lifting Shackles
Lashing Equipment
Container Lifting Equipment
Load Weighing Equipment
Vacuum Handling Equipment
Rigging
PPE
Offshore & marine
SPECIAL OFFERS
NEW PRODUCTS
    £806.31 ex VAT
    Kratos Rescue Quadpod
    Adjustable height from 1.15m - 2.15m  Max Load Capacity 500kg under head - 250kg leg  Can be used by 2 people at once Breaking Strength 23kN Can be used with 2, 3 and 4 legs 1.21m - 1.75m positioning 
    £3.58 ex VAT
    Galvanised Turnbuckle- Jaw/Jaw
    Both ends with shackle jaws Safety pin prevents accidental jaw opening Hot dip galvanised finish Drop forged  UNC thread type
    £79.99 ex VAT
    Stackable Post Stillage
    1.5t/1500kg Capacity Fully certified Stackable and heavy-duty Can be lifted by forklift or crane
    £3,074.40 ex VAT
    Green Pin Power Sling Shackle With Safety Nut & Bolt Pin
    Model: P-6043. Grade 8 high tensile steel, quenched and tempered. Minimum breaking load is 5 times the W.L.L. Conforms to EN 13889 and meets the performance requirements of US Fed Spec RC-C-271 Type IVA class 2, Grade A. Hot dipped galvanised. Temperature range -40 ° C up to +200 ° C. DNV Type Approved product (see product support for the latest certificate). Certificates available on request: 2.1, 2.2, 3.1, MTCa, CE, Lloyds Register of Shipping, MPI and/or US Inspection. Full CAD support available upon request.
    £899.00 ex VAT
    LES 32,000kg Machine Skate Load Moving System
    32000kg capacity Steel roller wheels Includes (1) front steerable and (2) rear skates with (1) tie bar Heavy-duty welded construction Fixed rubber matting for protection
    £769.00 ex VAT
    Boot Wash Station
    Choose between an in-line 3 person station or a back-to-back 2 person station Includes hoses, brushes and fittings Heavy-duty grate allows debris to fall through and run off in to drain Can be plumbed in-to a drainage system via the pipe on the side Simply connects to a standard female hose pipe fitting Fork pockets enable transportation by telehandler or forklift
    £569.00 ex VAT
    2 Person Telehandler Access Platform
    For up to 2 people Lift-up access bar Choose 1500mm or 1800mm length 250kg Capaity Suitable for forklifts and telehandlers Hinged back-guard for easy storage Safety harness attachment rings Internal handles Zinc-plated heel pins for secure attachment Maximum fork section: 150x50mm at 525mm centres
    £1,049.99 ex VAT
    High-Lift Access Platform
    High-entry design with ladder for high lifts Opening gate entry Harness attachment points Includes zinc-plated heel pins Adds 1000mm platform height from the fork pockets
    £385.00 ex VAT
    Eichinger Concrete Step Lifting Grab
    Wide jaw width 50-540mm Rubber lined jaws (easy to replace) Handle rotates through 90-degrees for use in confined spaces Eichinger design and manufacture
    £3.08 ex VAT
    Galvanised Turnbuckle- Jaw/Eye
    One end with a Jaw, one end with an Eye Hot dip galvanised finish Drop forged  UNC thread type

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies