Galvanised Rigging Screw- Jaw/Jaw (Metric)

  • Jaw type shackle fittings both ends
  • Hot dip galvanised finish
  • Mild steel construction
  • Metric thread

Estimated Lead Time to Dispatch

Same Day Before 2pm
As low as £3.90 £3.25
In stock
SKU
LES4932

Galvanised jaw/jaw closed Rigging Screws are intended to provide an adjustable rigging connection which applies tension between two components (usually wire ropes and suspension points). Proof load tested to twice the working load limit and a minimum breaking load of five times the working load limit.

Each Rigging Screw is clearly marked with ID and WLL. The jaw design provides safe connection points to ensure the rigging is securely fastened. A hot dip galvanised finish gives an added protection against corrosion in normal environments.

  • Galvanised finish
  • Various sizes available
  • Available with lock nuts
  • Mild steel construction
  • Proof load tested to 2 times the W.L.L.
  • Minimum breaking load is 5 times the W.L.L.
  • Metric thread

Code W.L.L a b c d e f g h i Weight
  (tonnes) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kgs)
RSJJ6 0.2 6 100 175 255 5 19 7 20 13 0.16
RSJJ8 0.32 8 108 199 282 6 25 9 24 14 0.27
RSJJ10 0.5 10 125 222 320 8 26 10.5 28 19 0.45
RSJJ12 0.7 12 195 320 479 10 32 13 33 22 0.85
RSJJ16 1.2 16 230 388 572 12 39 18 42 28 1.57
RSJJ20 1.5 20 270 454 672 16 46 20 51 33 2.67
RSJJ22 2.2 22 295 490 730 20 55 25 55 38 3.68
RSJJ24 3.2 24 325 558 819 22 63 30 70 46 5.3
RSJJ33 4.8 33 370 681 977 30 85 38 82 60 12
RSJJ39 6 39 400 710 1017 33 86 45 85 76 14.2
RSJJ45 8.5 45 400 760 1050 39 105 50 100 86 20.8
RSJJ48 11 48 400 820 1110 45 120 58 118 92 24