Crosby G-209 Forged Screw Pin Anchor Shackles

  • Up to 55 Tonne Capacity
  • Up to 2-1/2 Inch in Nominal Size
  • All markings fully forged at time of manufacture

Estimated Lead Time to Dispatch

Same Day Before 2pm
As low as £7.92 £6.60
In stock
SKU
LES4540

The G-209 screw pin anchor shackles meet the requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, Except for those provisions required of the contractor.

What makes Crosby Shackles so special?

Crosby shackles are far superior to any other shackle we sell. Forged at high temperature (including the markings) these shackles receive no surface damage from hand stamping and do not suffer from weaknesses found in shackles manufactured from steel bar. No expense is spared by Crosby in the design and manufacture of these vital rigging components.

 

  • The capacities 1/3 up to 55 metric tonnes are grade 6
  • Forged, Quenched and tempered with alloy pins
  • Working load limit and grade 6 is permanently shown on every shackle
  • The shackles are hot dip galvanised or self-coloured and are fatigue rated
  • Shackles 25 Tonne and over are RFID-equipped (Radio Frequency Identification)
  • The Shackles can be provided proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or any other certification. Proof testing and certification available when requested 
  • The Shackles are approved to be used in temperatures ranging from -40˚Cup to 204˚C
  • 3.25t through to 25T G209 anchor shackles are type aproveapprovedV certification
  • All other 209 and 210 shackles can meet charpy requirements of 42 Joule (31 ft-lbs) Avg. at -20C upon special request
  • Meets and exceed all requirements of ASME B30.26
  • Type approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7 and ABS guide for certification of cranes
  • Look for the RED pin... The mark of genuine Crosby quality

Nominal Size (in.) WLL (kg) SKU Weight (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) L (mm) M (mm) P (mm) Tollerance +/- (C) Tollerance +/- (A)
3/16 333 1018357 0.03 9.65 6.35 22.4 4.85 15.2 14.2 24.9 37.3 3.06 28.4 4.85 1.50 1.50
1/4 500 1018375 0.05 11.9 7.85 28.7 6.35 19.8 15.5 32.5 46.7 4.85 35.1 6.35 1.50 1.50
5/16 750 1018393 0.09 13.5 9.65 31 7.85 21.3 19.1 37.3 53 5.60 42.2 7.85 3.30 1.50
3/8 1000 1018419 0.14 16.8 11.2 36.6 9.65 26.2 23.1 45.2 63 6.35 51.5 9.65 3.30 1.50
7/16 1500 1018437 0.17 19.1 12.7 42.9 11.2 29.5 26.9 51.5 74 7.85 60.5 11.2 3.30 1.50
1/2 2000 1018455 0.33 20.6 16 47.8 12.7 33.3 30.2 58.5 83.5 9.65 68.5 12.7 3.30 1.50
5/8 3250 1018473 0.62 26.9 19.1 60.5 16 42.9 38.1 74.5 106 11.2 85 17.5 6.35 1.50
3/4 4750 1018491 1.07 31.8 22.4 71.5 19.1 51 46 89 126 12.7 101 20.6 6.35 1.50
7/8 6500 1018516 1.64 36.6 25.4 84 22.4 58 53 102 148 12.7 114 24.6 6.35 1.50
1 8500 1018534 2.28 42.9 28.7 95.5 25.4 68.5 60.5 119 167 14.2 129 26.9 6.35 1.50
1-1/8 9500 1018552 3.36 46 31.8 108 29.5 74 68.5 131 190 16 142 31.8 6.35 1.50
1-1/4 12,000 1018570 4.31 51.5 35.1 119 32.8 82.5 76 146 210 17.5 156 35.1 6.35 1.50
1-3/8 13,500 1018598 6.14 57 38.1 133 36.1 92 84 162 233 19.1 174 38.1 6.35 3.30
1-1/2 17,000 1018614 7.80 60.5 41.4 146 39.1 98.5 92 175 254 20.6 187 41.1 6.35 3.30
1-3/4 25,000 1018632 12.6 73 51 178 46.7 127 106 225 313 25.4 231 57 6.35 3.30
2 35,000 1018650 20.4 82.5 57 197 53 146 122 253 348 31 263 61 6.35 3.30
2-1/2 55,000 1018678 38.9 105 70 267 69 184 145 327 453 35.1 330 79.5 6.35 6.35